Accessories for PINPOINT® Monitors

• PINPOINT® Nitrate Monitor Calibration Fluids. 1 bottle each of 1 ppm, 10 ppm and 100 ppm nitrate calibration fluids.

• PINPOINT® Nitrate Probe

• PINPOINT® II Calcium Monitor Fluid Kit.
  1 bottle each of 100 ppm and 1,000 ppm calcium calibration fluids.

• Complete New Probe Assembly for the PINPOINT® II Calcium Monitor. Includes fluid kit.

• New Probe Assembly for the PINPOINT® Temperature Controller

• PINPOINT® Remote Sensor for Wireless Thermometer. The monitor can accept a maximum of 4 remote sensors, thus expanding the monitoring capability to 4 different locations to be displayed on the same PINPOINT® Temperature Display Monitor.
  

• PINPOINT® AC Adapter Kit (110 vac) is optional to replace the 9-volt battery, which some monitor owners find convenient, when monitoring full time. This AC Kit now contains special electronic filtering to avoid electrical interference that was occasionally seen in the past from some lighting systems.
  

• PINPOINT® AC Adapter Kit 220 vac, with a plug for UK or Hong Kong use, is optional to replace the 9-volt battery, which some monitor owners find convenient, when monitoring full time.
  
  

• PINPOINT® High-Precision pH Calibration Fluids
  4.000 +/- 0.002
  7.000 +/- 0.002
  10.000 +/- 0.005
  These come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). There is a free sample of these included with each PINPOINT® pH Monitor and PINPOINT® pH Controller. All electronic pH instruments should be calibrated monthly. Bulk boxes are available, please call for details.
  

• PINPOINT® ORP (Redox) Calibration Fluid
  Another American Marine first. ORP/REDOX calibration fluid. With a precise measurement of 400mV this calibration fluid is included with every PINPOINT® ORP Monitor and PINPOINT® ORP Controller. Occasional retesting with this fluid will keep your readings dead-on accurate. Also very useful to determine if an ORP/REDOX probe is ready for replacement. Bulk boxes are available, please call for details.
  

• PINPOINT® Conductivity Calibration Fluid
  45.0 µS standardized fluid for calibrating the PINPOINT® Conductivity Monitor
  

• PINPOINT® Salinity Calibration Fluid
  53.0 mS standardized fluid for calibrating the PINPOINT® Salinity Monitor with conversion chart
  

• PINPOINT® II Oxygen Monitor Membrane Cap and Fluid Kit The Membrane Cap at the end of the probe should be changed when necessary to ensure optimum performance.

• PINPOINT® II Oxygen Probe High performance

• PINPOINT® pH Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot cable with a high interference suppression jacket and Ag-AgCl reference.

• PINPOINT® ORP Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot cable with a high interference suppression jacket, Ag-AgCl reference, and is 99.9% pure platinum.

• PINPOINT® Probe storage fluid for pH and ORP/REDOX Probes This is the perfect fluid for the storage of any pH or ORP/REDOX Electrode. American Marine Probe Storage Fluid will keep the tip properly moist and extend the life of your probe during storage (60 mL).

• PINPOINT® 15 foot extension cable for the pH or the ORP/REDOX probe. This will add an additional 15 feet onto the 10 feet of the probe cable for a total of 25 feet. This extension cable will fit any probe with a standard BNC connector.